IoT consulting

IoT consulting for machinery manufacturers

Remote monitoring and predictive maintenance for your machines, both those already installed and those you sell, with no redesign. We start with what you want to achieve and move forward in three phases: you decide at each one and know what it costs before taking the step.

01
ConsultingTechnical and financial proposal
02
TrialOn one or two machines
03
ScalingYour whole range

You decide after each phase

Where we start

You tell us what you want to achieve with industrial IoT

We don't start with the technology. You tell us what you want to know or improve about your machine and what it carries today, and from there we prepare the consulting.

Improve performance

Know how much each machine really works, and why it stops.

What we measure
Running and stopped hoursCycles and partsReason for each stopShift
What you see
The percentage of running time for each machine and each shift, and stops ranked by reason.
What you do with it
Find the machine, shift or installation that performs worst, and compare them against each other.
From “I think it's going well” to knowing how much each machine produces.
Running time, this week
Machine 192%
Machine 288%
Machine 361%
Machine 490%

No. 3 stops for lack of material: it's not the machine.

Illustrative example

Know your consumption

What your machine uses in electricity, gas, air or water, and what it costs.

What we measure
Electricity (power analyser)Gas or dieselCompressed airWater
What you see
Consumption per hour, per part and per shift, and what it costs in euros.
What you do with it
Spot idle-running waste, tune start-ups and give your customer the real cost of each part.
Like the paint booth in Barcelona: they know what each hour of work costs.
Cost per part
€0.42 / part
Electricity58%
Gas34%
Air8%
Illustrative example

Apply predictive maintenance

From preventive maintenance, by calendar, to predictive: see when a signal is heading towards its limit, before the alarm goes off.

What we measure
TemperaturesVibrationsMotor currentPressuresHours of use
What you see
The trend of each signal against its limit. A motor that usually runs at 60 °C and reads 70, 71, 72 on consecutive days: the alarm hasn't gone off yet, but the trend is visible.
What you do with it
A predictive maintenance system can alert you, and you alert your customer and plan the visit.
You call the customer before they call you.
Motor temperature
alarm 80 °Ctoday 73 °C

It will reach 80 °C in a week.

Illustrative example

Provide better technical service

Know what's wrong with the machine before you get in the car.

What we measure
Alarms with timestampsMachine statusOperating parameters
What you see
The alarm history, and what was happening just before each one.
What you do with it
Diagnose by phone whatever you can, and when you do have to go, take the part that's needed.
Fewer blind trips, and less time with the machine down.
Line 2 alarms
08:12Low air pressure
08:13Motor 2 temperature rising
08:15Stop due to motor 2 overload

The cause was in the first alarm: the pressure.

Illustrative example

Charge for a service

Turn machine data into a contract with your customer.

What we measure
What you agree with your customerAvailabilityHoursConsumption
What you see
A monthly report for each machine and each customer.
What you do with it
Offer a monitoring or maintenance contract, or pay-per-use, backed by the data that justifies it.
Recurring monthly income, on top of the machine sale.
October report · Customer A
Availability96%
Working hours412 h
Alerts handled2
Next service12 Nov
Illustrative example

Improve your product

Design the next version with field data, not assumptions.

What we measure
Real usageLoadsOperator adjustmentsRecurring faults
What you see
How your whole installed base really performs, customer by customer.
What you do with it
Reinforce what fails, drop what nobody uses and prove your machine's performance when selling.
Your next machine, designed with what happens in the field.
Most frequent faults · installed base
Filter18
Sensor 310
Belt6
Illustrative example
Is your goal something else?

You tell us what you want to achieve. In the consulting we tell you which sensors or systems are needed, what it would cost and whether it's possible, and then we implement it for you.

Tell us your goal →
What changes

Without data, you guess. With data, you know. With alerts, you get ahead.

What happens when a machine is about to fail at your customer's site.

Without data

Just the phone

They call, angry
→
?You guess
→
Blind trip
Machine down

With data

What we give you: the signals from each machine, wherever you are

They call you
→
You check the data
→
You fix it
Machine down
Best

With alerts

What we give you: alerts and predictive maintenance

The system alerts you
→
You call first
→
Planned visit
Machine downWith predictive maintenance, it may never even stop.

Your customer can also see their machine's alerts, if you give them access. · Illustrative bars, not to scale.

The three phases

IoT consulting in three phases: three decisions

Each phase stands alone: you decide whether to continue after each one, and you always know what the next step costs before taking it.

01

Consulting

What we doWe analyse your machine and what you want to achieve with it. All we need from your team is a few hours of someone who knows it well.
What you getA technical and financial proposal: equipment or sensors, services, how it repeats across your range, the trial budget and the estimated monthly cost.
Fixed-price quote, based on what you want to achieve.
02

Trial on one or two machines

What we doWe set up what was proposed on one or two real units and compare it with what was promised.
What you getReal data from your machine and confirmation that it can be scaled.
Fixed-price quote to set up what came out of phase 1.
03

Scaling

What we doWe roll it out across your whole range and train your team, who gain autonomy.
What you getThe system running on all your machines. Then you decide: carry on with coppioT alone or with us alongside.
You pay for the application per machine, and you know the cost before starting.
Depending on your case

Series, custom-built or maintenance: the same method

What changes is how what we build is repeated.

If you build in series

Every machine leaving your factory can ship with IoT as standard. We build a kit, test it on one unit and it repeats on all of them.

  • Field data from your whole installed base, to improve the product.
  • A maintenance or monitoring service that your customers sign up for monthly.
  • A selling point: your machine is seen working from day one.
  • A good way to prepare for the EU Data Act.
For example: a range of compressors or boilers, with the same kit on every unit that leaves the factory.

If you build to order

Your customer asks for IoT in the project, and you don't want to build a platform each time. We use a common base and adapt it to each machine.

  • The same base carries over from project to project, even if each machine is different.
  • You hand over the project with its data up and running, without depending on a new supplier.
  • What you learn on one project helps you on the next.
For example: a packaging line or a booth built for one customer, with the signals that project needs.

If you install or maintain equipment

You don't build the machine, but you install or maintain it: solar panels, HVAC, compressors, boilers or generator sets. The method is the same.

  • You see how each of your customers' installations is performing without travelling.
  • You warn them before something fails, and plan maintenance visits.
  • A maintenance or remote-management contract billed every month.
For example: a company that maintains the solar panels or energy systems of several customers and wants to see them all from anywhere.
How is it possible?

Why can we fix the price?

Because behind it is coppioT, the no-code industrial IoT platform we built at engapplic. What used to be a bespoke engineering project is set up up to 90% faster and repeats on every machine, with equipment of any brand. And because we come from engineering: we know the whole vertical first-hand, from the PLC and the machine to the cloud, not just the cloud side.

Discover coppioT ↗

coppioT
Industrial IoT consulting

Industrial IoT consulting for machinery manufacturers: remote monitoring and predictive maintenance

Remote machine monitoring

With industrial IoT, the signals from every installed machine (temperatures, pressures, consumption, working hours and alarms) arrive on their own and you see them from anywhere. It's the basis for better technical service, solving more by phone and knowing how your machines perform at your customers' sites.

From preventive to predictive maintenance

Preventive maintenance inspects by calendar; predictive, when the data calls for it. With the trend of each signal, a predictive maintenance system can alert you before the alarm goes off, and you alert your customer before the machine stops.

IoT consulting from Barcelona

We are an industrial IoT consulting company based in Barcelona. We work with machinery manufacturers in Spain and other countries: we start with what you want to achieve, test it on one or two machines and roll it out across your whole range with coppioT, our industrial IoT platform.

Frequently asked questions

What people usually ask us

Both the business and the technical ones.

What is IoT consulting?

It's a service that helps you connect your machines to see their data and make the most of it: performance, consumption, predictive maintenance or a service for your customers. At engapplic we start with what you want to achieve, analyse your machine and propose what to build, with its cost, before doing anything. It's the practical way to start with Industry 4.0 without a long project.

I build machinery and want to start with IoT, but I don't know where. What do I do?

Start with one question: what do you want to know or improve about your machine? With that and a few hours of someone who knows it, we do phase 1: we tell you what is needed, what it would cost and whether it makes sense. If it fits, we trial it on one or two machines before rolling it out across your whole range.

Does it work with my PLC?

The PLC brand matters little: what matters is how it communicates. If it has OPC UA (many current Siemens and Beckhoff PLCs do) or Modbus TCP or RTU, we read its data directly. If it's older or lacks those protocols, there are alternatives, such as an OPC UA server or a communications module that acts as a bridge. We work it out in phase 1, with its cost.

Does the machine need to be modified?

No redesign is needed. We use the data from the PLC or the equipment it already has. If a sensor is missing for what you want to achieve (a consumption meter, a temperature probe), it comes up in phase 1, with its cost, and you decide.

What gets installed on the machine?

A small communications device (a gateway) next to the machine, or a PC you already have on the shop floor. It reads the PLC data and sends it on. If the machine is built in series, the same device repeats on every unit.

Does it need an internet connection?

Yes, the gateway needs to reach the internet: through your customer's plant network or with a 4G router, if they prefer not to mix networks. We decide this in phase 1.

How often does the data arrive?

You choose how often each signal is read, from seconds to minutes. Reading more often gives more detail and costs a little more, so we tune it to what you want to achieve.

Who can see the data?

Whoever you decide, each with their own permission: your technical team, your sales team and, if you wish, your customer with their machine's data.

How much does it cost?

It depends on what you want to achieve, which is why we don't publish prices. Consulting and the trial have a fixed-price quote, which you know before starting. In scaling you pay for the application per machine, and you also know the cost before deploying.

How much of my time does it take?

Little. In phase 1, a few hours of someone who knows the machine well; we do the rest. In the trial, access to one or two units.

We already have remote access via VPN. Why anything more?

Remote access is for getting in once something has already happened. Seeing the data is something else: the signals arrive on their own, all day, even if nobody logs in, and that's where you see what an alarm doesn't show. The two coexist.

What if I already have a SCADA?

They complement each other. The SCADA is on the shop floor, for that machine's operator. With IoT, you see the data from all your installed machines from anywhere: like a SCADA in the cloud, with no programming.

Can you offer predictive maintenance?

Yes, it can be offered. A motor that usually runs at around 60 °C and alarms at 80: if one day it reads 70, the next 71 and then 72, the alarm hasn't gone off yet, but the trend is visible. A predictive maintenance system can alert you earlier. It's the next step after preventive maintenance: instead of inspecting by calendar, you inspect when the data calls for it. (Illustrative example.)

Can I charge my customers for this?

It's one of the ideas: a service or monitoring contract with their machine's data. In phase 1 we work out which service makes sense for your type of machine and customer.

Do I have to stay with you?

No. Each phase stands alone, and once scaling is complete you can carry on with coppioT alone, with your now-trained team, or with us alongside.

Do you work outside Spain?

We are an industrial IoT company based in Barcelona, with projects around the world: much of the work is done remotely, and we go to wherever the machine is when needed.

Contact

Start with 15 minutes

You tell us what machine you build and what you'd like to achieve with it, and we tell you whether it makes sense and what phase 1 would look like.

  • 1You tell us about your machine and your goal.
  • 2We call you for a 15-minute chat.
  • 3If it fits, we propose phase 1.