IoT consulting and engineering for machine builders

Your machines, in plain sight from anywhere.

We are your IoT consultancy and your outsourced electrical engineering and programming team. We help you implement IoT on your machines, simply.

Packaging machine · line 2
At your customer's site
Running
Working hours1,284 h
Consumption today146 kWh
Alarms today0
Productivity1,240 pieces/hShift forecast: 9,900 pieces
Cost per hour18.40 €/hDay forecast: 147 €
Indicative example
YOUR MACHINES
BilbaoOK
ValenciaCheck
LyonOK
⚠ POSSIBLE EARLY ALARMValencia · motor 2 temperatureWill hit the limit in about 7 days.
We know the machine10+ years programming Siemens and Beckhoff PLCs
We connect it fastup to 90% faster, with coppioT
Phased consultingyou decide whether to continue after each phase
What we do

Industrial IoT consulting and engineering: two ways to help you

To connect your machines, both installed and those you will sell, or to program the ones you are building.

IoT consulting

See how each installed machine is performing and give better service. Here is what you can achieve:

  • Your data in plain sight, wherever you areHours, temperatures, consumption and alarms for every machine.
  • Warnings before a breakdownA predictive maintenance system can alert you before the alarm goes off.
  • Fewer technician tripsWhat you see remotely gets solved over the phone.
  • Recurring revenue that adds valueA service for your customers, built on their machine's data.
coppioTAWSOPC UAModbus

See the consulting →

or

Industrial engineering

Programming and schematics for your machines: over ten years with Siemens and Beckhoff, now with AI to gain speed and quality. Hourly or fixed price.

  • Siemens PLCTIA Portal
  • Beckhoff PLCTwinCAT 3
  • EPLAN electrical schematicsFrom the design office to the cabinet.
  • PCB design with KiCadAs a complementary service.
SIEMENSBECKHOFFEPLANKiCad

See the engineering →

How we work

From idea to your whole range, in three steps

You tell us what you want to achieve (improve performance, understand consumption, apply predictive maintenance…) and what your machine runs on. From there:

01

Consulting

We analyse your machine and your goal.

You get a technical and financial proposal
02

Pilot on one or two machines

We deploy the proposal on real units.

You get real data from your machine
03

Scale-up

Across your whole range, with training for your team.

You get your range connected, and your team trained
No strings attached. After each step you decide whether to continue, and you know the cost before you commit.
Case studies

Projects already up and running

A selection of projects we have delivered for manufacturers and plants. Swipe →

See all case studies →
Paint booth with the IoT equipment (illustrative image)Illustrative image
IoT · coppioT

Paint booth

Car body shop, Barcelona.

They know what each hour costs: fuel, electricity and cost per piece.
Brazing furnace
IoT

Brazing furnace

Metalworking. Temperatures, belt speed, consumption and quality reports.

−70% unplanned stops · +8% productivity
Air compressor
IoT

Air compressor

Machine builder. Availability, consumption and maintenance.

Availability from 85% to 95%
Industrial printing
IoT

Industrial label printing

Live consumption, overconsumption alerts and reports.

−6% energy consumption
AGV
Engineering

Control of 75 AGVs

Automotive. The fleet had an obsolete control system with no spare parts.

A new, modular control system
Industrial laser
Engineering

Industrial laser

Control functions that no commercial system covered.

A custom control system
Who we are

Over ten years building machines

Over ten years programming machines with Siemens and Beckhoff and commissioning them. That is why we start with your machine and what you want to know about it, not with the technology.

Meet us →

Rubén Moreno
RubénManaging Director
Marco
MarcoTechnical Director
coppioT: overview of a project with its locations, gateways and devices
coppioT: an OPC UA device with its values and its last reading
Real coppioT screenshots
Our software

Behind every IoT project, coppioT

The no-code industrial IoT platform we built at engapplic. It collects the data your machine and installation already produce (PLCs, controllers, energy analysers and other devices), from any brand, and turns an engineering project into something repeatable on every machine: up to 90% faster than building it by hand.

Discover coppioT ↗
Industrial IoT and engineering in Barcelona

Industrial IoT and PLC programming for machine builders

Industrial IoT consulting

We help machine builders connect their installed machines and other equipment, such as solar installations or energy systems, with industrial IoT: remote monitoring, alerts and predictive maintenance, without redesigning the machine. We start with a fixed-price IoT consultancy and move forward in phases, so each step makes sense before you take the next.

Siemens and Beckhoff PLC programming

We program Siemens PLCs with TIA Portal and Beckhoff PLCs with TwinCAT 3, including their HMI screens, and we do the electrical engineering in EPLAN and the commissioning. Over ten years building machines, now with the help of AI.

coppioT, our industrial IoT platform

Behind every IoT project is coppioT, the no-code platform we built at engapplic. It reads data from PLCs, controllers, energy analysers and other devices over OPC UA or Modbus, from any brand, and lets you see every machine from anywhere. We work from Barcelona with projects worldwide, and coppioT works in any country.

Frequently asked questions

What people usually ask us

What does engapplic do?

We are an IoT consulting and industrial engineering company based in Barcelona. We were founded with one mission: to connect industry to the cloud. Today we help machine builders see the data from their installed machines and deliver service with it, and we program PLCs (Siemens and Beckhoff) and EPLAN schematics.

Does the machine have to be modified?

There is no need to redesign it. We use the data from the PLC or from the equipment it already has. If your goal needs a sensor that is missing, we cover it in the first phase, with its cost.

What gets installed on the machine?

A small communications device (a gateway) next to the machine, or a PC you already have. It reads data from the PLC and from other equipment, such as energy analysers, and sends it to the cloud so you can see it from anywhere. If the internet connection drops, it stores the data and sends it when the connection returns. The machine keeps working just as before.

How much does it cost?

It depends on what you want to achieve, which is why we do not publish prices. The consulting and the pilot have a fixed quote, and at the scale-up stage you know the cost of the application per machine before you start.

I build machinery and want to get started with IoT, but I don't know where to begin. What do I do?

Start with one question: what do you want to know or improve about your machine? With that and a few hours from someone who knows it, we run phase 1: we tell you what is needed, what it would cost and whether it makes sense. If it fits, we test it on one or two machines before rolling it out across your whole range.

How is this different from remote VPN access?

Remote access is for getting in once something has already happened. With IoT, the machine's signals reach you on their own, all day long, and you see what an alarm does not show. The two work side by side.

What is coppioT?

The no-code industrial IoT platform we built at engapplic. It connects PLCs, energy analysers and other equipment from any brand over OPC UA or Modbus, through a gateway on the plant floor. The data arrives in dashboards with KPIs, costs and alerts, and coppioT can also be operated from an AI assistant such as Claude. It is what lets us set up an IoT project up to 90% faster than by hand and repeat it on every machine.

Do you program PLCs without an IoT project?

Yes. Engineering is a business line of its own: Siemens and Beckhoff PLC programming and EPLAN schematics, hourly or at a fixed price.

Where do you work?

We are an industrial IoT company based in Barcelona, with projects worldwide: much of the work is done remotely, and we go wherever the machine is when needed.

Contact

Does your machine fit?

In 15 minutes, you tell us what machine you build and what you would like to achieve with it. We tell you whether it makes sense and how we would start.

  • 1You tell us about your machine and your goal.
  • 2We call you for a 15-minute chat.
  • 3If it fits, we propose phase 1.