Industrial engineering in Barcelona

Engineering and PLC programming, from idea to a machine that works

We are your engineering team for the electrical and control side of the machine: concept, EPLAN schematics, PLC and HMI programming on Siemens or Beckhoff, and commissioning, until the machine does its job and hits its metrics. The whole chain, or just the part you need.

MAIN.TcPOUTwinCAT 3
// Conveyor: door interlock and start warningbInterlock := NOT bAlarm;nOpenDoor  := 0;i := 1;WHILE i <= NUM_DOORS DO    IF NOT aDoorClosed[i] THEN        nOpenDoor  := i;       // first open door        bInterlock := FALSE;        EXIT;    END_IF    i := i + 1;END_WHILE // Interlock lost while running (0 = alarm)IF rsRun.Q1 AND NOT bInterlock THEN    nStopCause := nOpenDoor;END_IF rsRun(SET    := bStartButton AND bInterlock,      RESET1 := bStopButton OR NOT bInterlock);tonWarning(IN := rsRun.Q1, PT := T#3S);bBuzzer := rsRun.Q1 AND NOT tonWarning.Q;fbConveyor(bEnable := tonWarning.Q,           rSpeed  := rSetpoint);
AI Reviewed: door interlock added. ✓ Supervised by an engineer
EPLAN P8
Illustrative
Over ten years building machineswith Siemens and with Beckhoff
With AIfaster, supervised by an engineer
All of it or a parthourly or at a fixed price
Our engineering suite

How we like to work, from idea to a machine delivering its numbers

Everything electrical and control-related for your machine, in a single team. Hire the whole chain or just the link you are missing.

01
ConceptWhat the machine has to do and how we will control it.
02
DefinitionControl architecture, PLC, communications and signals.
03
Electrical engineering and sequence chartsEPLAN Electric P8 schematics, including safety, and the machine cycles.
04
Offline programmingPLC and HMI before going to the machine, and simulation when the project calls for it.
05
CommissioningAt your plant or your customer's.
06
Machine metricsWe tune until it hits its rate, cycle times and availability.
PLC and HMI programming

Siemens or Beckhoff: the program and its screens

On both platforms we build the PLC program and its HMI. And we leave it running on the machine.

TIA PortalIllustration
Siemens · Demo_Project Totally Integrated Automation PORTAL ProjectEditViewInsertOnlineTools Project tree ▾ Demo_Project ▾ PLC_1 [CPU 1516-3 PN/DP] Device configuration ▾ Program blocks Main [OB1] FB_Conveyor [FB10] FB_Alarms [FB20] DB_Conveyor [DB10] ▸ Technology objects ▸ PLC tags ▸ PLC data types ▸ HMI_1 [Unified Comfort] Demo_Project ▸ PLC_1 ▸ Program blocks ▸ Main [OB1] ▾ Network 1: Start/stop with interlockRun latch: stop, an alarm or an open door drop it "Start""Run""Stop""Alarm""All_Doors_Closed""Run" ▾ Network 2: Start warning (3 s) TONINPTQET "Run""Warning_Timer""Start_OK" T#3S ▾ Network 3: Conveyor "FB_Conveyor" ENbEnablerSpeedENObRunning "Start_OK""rSetpoint""Conveyor_Running" ✔ Compilation finished (errors: 0; warnings: 0)
SIEMENSTIA Portal

Siemens programming

PLC program and HMI screens in TIA Portal, on Basic panels or WinCC Unified, mainly for new machines.

PLCHMI BasicWinCC UnifiedCommissioning
With WinCC Unified we are faster: AI helps us generate and review the screens.
TwinCAT 3Illustration
Demo_Project · TwinCAT XAE FILEEDITVIEWPROJECTBUILDTWINCATPLC Release TwinCAT RT (x64) ▶ Solution Explorer ▾ Demo_Project ▸ SYSTEM ▸ MOTION ▾ PLC ▾ Machine_PLC ▸ References ▸ DUTs ▸ GVLs ▾ POUs FB_Conveyor MAIN (PRG) ▸ VISUs ▸ SAFETY ▾ I/O ▸ Devices Device 1 (EtherCAT) MAIN ✕ 123456789101112131415161718192021222324252627 PROGRAM MAIN VAR rsRun : RS; tonWarning : TON; fbConveyor : FB_Conveyor; bInterlock, bBuzzer : BOOL; i, nOpenDoor, nStopCause : INT; END_VAR // Conveyor: door interlock and start warning bInterlock := NOT bAlarm; nOpenDoor := 0; i := 1; WHILE i <= NUM_DOORS DO IF NOT aDoorClosed[i] THEN nOpenDoor := i; // first open door bInterlock := FALSE; EXIT; END_IF i := i + 1; END_WHILE // Interlock lost while running (0 = alarm) IF rsRun.Q1 AND NOT bInterlock THEN nStopCause := nOpenDoor; END_IF rsRun(SET := bStartButton AND bInterlock, RESET1 := bStopButton OR NOT bInterlock); tonWarning(IN := rsRun.Q1, PT := T#3S); bBuzzer := rsRun.Q1 AND NOT tonWarning.Q; fbConveyor(bEnable := tonWarning.Q, rSpeed := rSetpoint); Error List ⓪ 0 Errors ⚠ 0 Warnings ⓘ 0 MessagesBuild succeeded
BECKHOFFTwinCAT 3

Beckhoff programming

Program and HMI in TwinCAT 3, for Beckhoff PLCs and IPCs, integrated with the rest of the machine and its communications.

PLCHMIIPCCommissioning
AI helps us write and review the program; an engineer designs it, structures it and supervises it.
EPLAN Electric P8Real screenshot
Electrical schematic page in EPLAN Electric P8 showing sensors and their wiring
EPLANElectric P8

Complete electrical engineering

New schematics or updates to the ones you already have, including machine safety and the bill of materials (BOM) if needed. Also as an external engineering office.

SchematicsSafetyBOMEngineering office
KiCadReal screenshot
3D view in KiCad of a stack of printed circuit boards designed by engapplic
KiCadPCB

PCB design

When the machine needs a custom board, we design it in KiCad and, if you wish, manage its manufacturing with a supplier.

SchematicPCB3DManufacturing
Sectors

Machines we have programmed

Over a hundred engineering and PLC programming projects, mostly for machine builders and integrators.

Who we work forMachine buildersEngineering firms and integratorsPlants upgrading their machines
AutomotiveLines, screwdriving, crimping and machine retrofits.
Test and testing machinesTest benches, quality control, high-pressure leak testing and characterisation.
Palletising and packagingPalletisers, case sealers and labelling machines.
FoodLabelling, filling and production lines.
Pharma and medicalMachine retrofits and drying and production equipment.
Laser and industryLaser control, welding and robotics.
Metalworking and steelCutting, forming and production monitoring.
EnergyEnergy metering, compressors and electrical test equipment.
What we deliver

Everything you need to maintain your machine

When we finish, the machine works and you have everything you need to maintain it, with us or without us.

EPLAN Electric P8 schematicsUpdated to match what was built.
Commented PLC programOrganised and explained, so anyone can understand it.
HMI screensWith their alarms and navigation.
BackupOf the program and the screens, exactly as left.
Machine manualFor the operator and for maintenance.
With AI

Where AI helps us, and where nothing changes

AI makes us faster at every stage. The standard is the same: an engineer supervises everything and it is tested on the machine.

SchematicsWe produce EPLAN schematics in less time.
ProgramWe write and review PLC code in less time.
ScreensIn WinCC Unified we generate and review screens much faster.
DocumentationThe program is commented and documented, easier to maintain.
What does not change: an engineer with over ten years building machines designs, structures and supervises the work, and the machine is tested at commissioning.
How we work

Hourly or at a fixed price

Hourly

As an external engineering office: we reinforce your team with a PLC programmer or an EPLAN technician when it cannot keep up, or when you want to try out ideas without a fixed scope and develop as you go.

Fixed price

A complete project: we define it with you, give you a price and deliver it with commissioning.

Engineering case studies

What we have done

See all case studies →
AGV
Engineering · embedded control

Control of 75 AGVs

Automotive. The fleet had an obsolete control system with no spare parts.

A new, modular control system
Industrial laser
Engineering · embedded control

Industrial laser

Control functions that no commercial system covered.

A custom control system
Siemens and Beckhoff PLC programming

PLC programming: machines and lines we have programmed

Automotive: lines and test benches

Screwdriving and crimping lines, machine retrofits and test benches: high-pressure leak testing, quality control and characterisation. PLC program, HMI screens and commissioning at the plant.

Packaging and food

Palletisers, case sealers, labelling machines and filling lines. With TIA Portal or TwinCAT 3, integrated with the rest of the line and its communications, until reaching the rate the customer asks for.

Laser, AGV and robotics

Control of a fleet of 75 AGVs, custom control of an industrial laser and robotic welding lines. And if you later want to see how the machine performs, we connect it to coppioT, our industrial IoT platform.

What if you also want to see your machines from anywhere?

With coppioT, the no-code industrial IoT platform we built at engapplic, the machine we program connects without being redesigned.

See IoT consulting →
Frequently asked questions

What people usually ask us

Which PLCs do you program?

Siemens, with TIA Portal, and Beckhoff, with TwinCAT 3. On both we build the PLC program and the HMI screens, and we have been building machines with them for over ten years.

What does your engineering include?

All the electrical and control work for the machine: concept, definition, EPLAN Electric P8 schematics including safety, sequence charts, PLC and HMI programs, and commissioning until the machine delivers its numbers. You can hire it whole or in parts.

Are you machine safety consultants?

No. We include safety in the schematics and in the program, and we can advise you, but we are not a specialised or certified machine safety consultancy.

Do you build HMIs in WinCC Unified?

Yes, and on Basic panels too. With WinCC Unified we are faster, because AI helps us generate and review the screens.

Do you work hourly or at a fixed price?

Both. Hourly, as an external engineering office; at a fixed price, when it is a complete project with commissioning.

Can EPLAN electrical schematic design be outsourced?

Yes. We produce new schematics in EPLAN Electric P8 or update the ones you have, as an external engineering office or per project.

Can you work remotely?

Yes. A good part of the engineering and programming is done remotely. We carry out commissioning at your plant or your customer's.

How do you use AI?

To speed up schematics, programming, screens and documentation. An engineer supervises everything and it is tested on the machine: AI gives us speed, it does not lower the standard.

Where do you work?

We are an industrial engineering company based in Barcelona, with projects worldwide: much of the work is done remotely, and we go wherever the machine is when needed.

Contact

Tell us about your project

Which machine it is, which PLC it runs and which part you need. We will reply with how we would do it and whether it is hourly or at a fixed price.

  • 1You tell us about the project.
  • 2We talk for 15 minutes.
  • 3We propose how to do it.